Powertap SLC+ User Guide Manual de usuario descargar pdf (Pagina 23)

Computer Setup

The setup feature has five(5) main modes. You do not have to

complete all five to change settings. Please reference each

mode to determine the correct location to begin. NOTE: The

computer illustrations for each mode displays the factory

default settings.

COMPUTER SETUP MAIN MENU

1) Press either [MODE] or [SELECT] to activate the computer.

NOTE: The version of firmware is displayed upon startup. The

most updated firmware version is available at

www.cycleops.com. (FIGURE 28)

2) Extended hold of [MODE] and [SELECT] simultaneously

enters computer setup function. NOTE: Continue to hold

through

“clr” screen. Releasing hold early will clear all current

data.

3) The setup mode displays three (3) letters and numbers 1-5.

Each letter represents a setup menu. A flashing alphanumeric

character indicates current selection. (FIGURE 29)

E = exit, return to ride mode

d = restore default settings

T = test mode

1 2 3 4 5= setup menus

Note: Only the SLC+, SL+, Pro+ and 2.4+ have setup menus 2, 3

and 4.

4) Press [SELECT] to scroll to the desired setup mode.

5) Press [MODE] to begin setup.

Set

12345

FIGURE 29

Pro

5.33

FIGURE 28

Note: The new pro-

duction version

will mark 6.0 ver-

sion of firmware.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Sin comentarios

Powertap SLC+ User Guide Manual de usuario Pagina 23