Powertap SLC+ User Guide Manual de usuario descargar pdf (Pagina 15)

TORQUE FUNCTION

Shows the torque placed on the hub in inch-pounds. To display torque while

in trip mode:

1) Press [MODE] to scroll the cursor to the top line of the main display.

2) Press [SELECT] until the current power function is displayed.

3) Hold [SELECT] until the word “WATTS” begins to flash. A blinking “WATTS” display indicates

the torque function is currently displayed.

4) Press [SELECT] to return to the current power function. (FIGURE 12).

000

58.I0

FIGURE 12

IMPORTANT: ZERO TORQUE

Frequently the torque must be zeroed to ensure the most accurate

power information is displayed. If the current power display is positive

negative while coasting the the torque must

be zeroed. This operation

must be done while stopped with no tension on the chain, no tension

placed on the pedals, and the transmission icon must be illuminated. To

zero torque:

1) Press [MODE] to scroll the cursor to the top line of the main display.

2) Press [SELECT] until current power function is displayed.

3) Hold [SELECT] until the word “WATTS” begins to flash to enter the

torque function.

4) Hold [SELECT] again until “0” is shown.

5) Press [SELECT] to return to current power. The current power func-

tion will now read zero while coasting.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Sin comentarios

Powertap SLC+ User Guide Manual de usuario Pagina 15